Recovery Pod — 2-Person Full-Spectrum Infrared Sauna Australia

Interior Dimensions

Width: 1105mm

Depth: 965mm

Height: 1780mm

Bench space: 450mm x 1100mm

Exterior Dimensions

Width: 1200mm

Depth: 1050mm

Height: 1900mm

Capacity

Seats: 2 people comfortably

Weight

120kg

Electrical

220V | 1,950W

Standard 10A plug | 2m cord

Temperature Range

25–65°C

Compact footprint — designed to fit in most spare rooms, home gyms, or garages.

The Recovery Pod is fitted with 9 low-EMF, full-spectrum infrared heaters — strategically positioned to deliver complete, even coverage across your entire body.

Heater positions:

3 x back wall | 2 x each side wall | 1 x bench front | 1 x floor

Full-spectrum technology delivers near, mid, and far infrared wavelengths simultaneously:

Near infrared — targets circulation and skin-level tissue

Mid infrared — reaches soft tissue, joints, and muscles

Far infrared — deepest penetration for core warming, heavy sweat, and detox

The result is a more complete, therapeutic recovery session than far-infrared-only models.

Solid Canadian Hemlock — internal & external (no toxic glues or varnishes)

8mm tempered safety glass door

Solid wood floor & bench

Digital touchscreen control panel

2 x built-in Resonance speakers

Stainless steel hardware throughout (screws & nails)

Natural Canadian Hemlock timber handle

The Recovery Pod has been independently tested and certified to meet Australian electrical safety standards.

EMF testing results:

The heating panels were independently tested at distances between 3cm and 30cm from the panel. At 3cm — the closest point of contact — the measured EMF was just 2.3mg, well below the widely referenced 10mg safety threshold.

Your Recovery Pod arrives flat-packed and is designed for easy self-assembly. Most customers are up and running in 30–60 minutes — no tools required.

Setup checklist:

- Choose a flat, level, dry indoor surface

- Allow 50mm clearance on the sides and at the rear

- Allow 300mm of space above the roof

- Ensure the power outlet is accessible at all times

- Confirm your circuit matches the required 10A power amperage

Important: The Recovery Pod is designed for indoor use only. Outdoor installation will void your warranty.

Watch our full step-by-step installation video below.

Residential customers

For residential use, your sauna is covered for defects in materials and workmanship for a period of 5 years, subject to our full terms and conditions available here.

Commercial customers

3‑year warranty
For units operated in commercial settings, we provide a comprehensive 3‑year warranty.

Fast delivery

Perth metro orders are delivered 1-2 business days. All other Australian states typically arrive within 7–10 business days.

Rural & Remote Delivery

Delivery to rural and remote areas requires a customised freight quote. Exact delivery timeframes and costs will vary depending on your location and will be confirmed at time of booking.

To receive a free freight quote, please email us at hello@resonancerecovery.com with your full delivery address and we'll get back to you as soon as possible.

Curb side/driveway drop

Delivery is curb side: the sauna will be placed on your driveway, in a safe and level area, or inside a level garage if accessible. We’ll confirm a delivery window in advance and send tracking on dispatch. The purchaser must be home to receive and sign; missed deliveries may incur redelivery or storage fees.

We’re here to help — Tell us your access requirements (driveway/garage access, stairs, narrow entries) and preferred timing and we’ll coordinate the rest: hello@resonancerecovery.com.

Responsibility

• It is the customer’s responsibility to ensure someone is present to receive and sign at the scheduled time.
• It is the customer’s responsibility to ensure clear, safe ground‑level access for curb side/driveway/garage placement (no stairs).
• It is the customer’s responsibility to provide accurate delivery details and advise of any access constraints in advance.

Once assembled, your Recovery Pod is ready to use immediately — just plug it into a standard 10A wall outlet and let it heat up for your first session. Assembly itself takes around 30–60 minutes with two people.

A traditional sauna heats the air around you to very high temperatures (typically 80–100°C), which then heats your body indirectly. An infrared sauna uses infrared light to warm your body directly, operating at much lower air temperatures (40–60°C) while still inducing a deep, therapeutic sweat.

Most people find infrared saunas more comfortable and accessible — particularly those who find the intense heat of a traditional sauna difficult to tolerate. The lower air temperature also means infrared saunas are easier to breathe in, making sessions longer and more enjoyable.

For most people, a session of 20–45 minutes at 45–60°C is ideal. If you’re new to infrared saunas, we recommend starting with shorter sessions (15–20 minutes) at a lower temperature and gradually increasing as your body adapts.

Always stay hydrated — drink water before, during, and after your session. Listen to your body, and exit the sauna if you feel dizzy or uncomfortable at any point.

General guidance only: The information provided is general wellness guidance and is not medical advice. Consult a qualified health professional before beginning regular sauna use, especially if you have any medical conditions.

Running the Recovery Pod costs approximately $0.68 per hour based on average Australian electricity rates. For most users doing 3–5 sessions per week, that works out to roughly $10–14 per month in electricity — less than a single trip to a day spa or wellness centre.

The Recovery Pod runs on a standard 10A Australian plug (220V). Simply plug in and go — no electrician, no special wiring, no additional cost. It’s designed to work with a standard household power outlet straight out of the box.

Infrared is a spectrum of light wavelengths just beyond visible light that transfer energy as radiant warmth. Unlike a traditional sauna that heats the air around you, an infrared sauna directs most of its energy directly into your body — warming you from the inside out.

As your core temperature rises gently, your body responds with increased metabolic activity and a deep, heavy sweat. This supports lymphatic drainage, cardiovascular circulation, immune function, and the body’s natural detox processes.

There are three infrared wavelengths: near (surface circulation), mid (muscles and joints), and far (deep core warming). The Recovery Pod uses all three simultaneously for a complete, full-body session.

The Recovery Pod features 9 low-EMF, full-spectrum infrared heaters. Full-spectrum means the heaters emit near, mid, and far infrared wavelengths at the same time — targeting everything from surface skin and circulation through to deep muscle tissue and joints.

Near infrared supports skin-level circulation, mid infrared reaches soft tissue and joints, and far infrared penetrates deepest for core warming and heavy sweat detox. This gives you a more complete, therapeutic session than far-infrared-only models.

EMF (electromagnetic fields) refers to the low-frequency electric and magnetic fields generated by electrical devices, including infrared sauna heaters, wiring, and control electronics. EMF is measured in milligauss (mg).

The commonly referenced safety threshold is 10mg. The heating panels in the Recovery Pod have been independently tested at just 2.3mg at 3cm from the panel — well below that threshold, and one of the lowest results in the category.

Your safety is built into every component of the Recovery Pod.

No — the Recovery Pod is designed exclusively for indoor use. Placing it outdoors exposes it to moisture, temperature extremes, and conditions it isn’t built to withstand, and will void your warranty.

For best results, install it in a spare room, home gym, study, or covered garage. As long as the surface is flat, dry, and level, you’re good to go.

Assembly takes 30–60 minutes and requires two people — but no tools. Your Recovery Pod arrives flat-packed with everything you need to get set up. Watch our full step-by-step installation video on the product page for a walkthrough of the entire process.

With a little regular care, your Recovery Pod will look and perform beautifully for years.

After every session:

- Place a towel on the bench and floor during use to protect the wood from sweat

- Once finished, gently wipe down the interior wood to remove excess moisture

- Leave the door open for a few minutes to air out

For deeper cleaning:

- Unplug the sauna from the wall before cleaning

- Use a damp cloth to gently scrub any sweat stains from the wood

- Do not use liquid or aerosol cleaners inside the sauna

- Clean the glass door with a non-ammonia glass cleaner

- Periodically dust the vents and check electrical connections

We recommend a quick wipe-down after every session and a more thorough clean once a month.

Yes. The Recovery Pod is backed by a comprehensive warranty:

Residential use: 5 years on body and electrical parts

Commercial use: 3 years on body and electrical parts

See the Resonance Recovery Limited Warranty for full terms and conditions.